WATTYL Killrust Satin Enamel Colorbond Paperbark 300g Spray Paint
Couldn't load pickup availability
WATTYL Killrust Satin Enamel Colorbond Paperbark 300g Spray Paint
Wattyl Killrust Satin Enamel Colorbond Paperbark 300g is a fast-drying, anti-corrosive aerosol topcoat designed for colour-coordinated repairs and touch-ups on pre-coated metal surfaces. Factory tinted to coordinate with Colorbond Paperbark, it delivers a smooth satin finish in a warm beige colour.
Ideal for suitably prepared Colorbond steel fencing, garage doors, gutters, downpipes and other pre-coated metalwork, Killrust Satin Enamel helps refresh existing coatings while providing protection against corrosion. Its satin sheen is suited to maintaining a consistent appearance across metal fixtures and fittings.
The ready-to-use 300g aerosol provides convenient spray application without separate spray equipment. Suitable for interior and exterior use, it is a practical choice for smaller repairs, colour-matched touch-ups and general metal maintenance.
Key Features
- Colorbond Paperbark Colour: Factory tinted to coordinate with Colorbond Paperbark and Terrace colour finishes.
- Anti-Corrosive Formula: Helps protect suitably prepared metal surfaces against corrosion.
- Smooth Satin Finish: Delivers a decorative, low-gloss appearance in a warm beige colour.
- Fast-Drying Topcoat: Surface dries in approximately 30 minutes under specified conditions.
- Convenient Aerosol Application: Ready-to-use spray format for metal touch-ups without separate spray equipment.
ADDITIONAL INFORMATION
- Brand: Wattyl
- Range: Killrust Satin Enamel
- Product Code: 115303.530
- Barcode: 9300702142123
- Type: Anti-Corrosive Satin Enamel Aerosol Topcoat
- Size: 300g Aerosol
- Colour: Colorbond Paperbark
- Colour Reference: Paperbark / Terrace
- Finish: Satin
- Gloss Level: 30–35 at 60 Degrees
- Suitable For: Suitably Prepared Pre-Coated Metal Surfaces
- Application: Colorbond Colour Matching, Metal Touch-Ups and Maintenance
- Application Method: Aerosol Spray
- Interior/Exterior: Interior and Exterior
- Recommended Coats: 2 or More Coats
- Coverage: Up to 2m² per 300g Aerosol, Depending on Surface Texture, Porosity and Film Build
- Surface Dry: Approximately 30 Minutes
- Recoat Time: Approximately 24 Hours
- Full Cure: Approximately 7 Days
- Drying Conditions: 25°C and 50% Relative Humidity
- Surface Preparation: Ensure surfaces are clean, dry and free from loose paint, rust, grease and contaminants. Prepare and prime substrates where required before topcoating.