WATTYL Killrust Satin Enamel Colorbond Pale Eucalypt 300g Spray Paint
Couldn't load pickup availability
WATTYL Killrust Satin Enamel Colorbond Pale Eucalypt 300g Spray Paint
Wattyl Killrust Satin Enamel Colorbond Pale Eucalypt 300g is a fast-drying, anti-corrosive aerosol topcoat designed for colour-matched repairs and touch-ups on pre-coated metal surfaces. Its soft, muted green colour coordinates with Colorbond Pale Eucalypt, delivering a smooth satin finish for metal maintenance.
Ideal for suitably prepared Colorbond steel fencing, garage doors, gutters, downpipes and other pre-coated metalwork, Killrust Satin Enamel helps refresh existing coatings while providing protection against corrosion. Its satin sheen is suited to maintaining a consistent appearance across metal fixtures and fittings.
The ready-to-use 300g aerosol provides convenient application without separate spray equipment or equipment cleanup. Suitable for interior and exterior use, it is a practical choice for smaller repairs, colour-coordinated touch-ups and general metal maintenance.
Key Features
- Colorbond Pale Eucalypt Colour: Factory tinted to coordinate with Colorbond Pale Eucalypt and Meadow colour finishes.
- Anti-Corrosive Formula: Helps protect suitably prepared metal surfaces against corrosion.
- Smooth Satin Finish: Provides a decorative, low-gloss appearance in a muted green colour.
- Fast-Drying Topcoat: Surface dries in approximately 30 minutes under specified conditions.
- Convenient Aerosol Application: Ready-to-use spray format for metal touch-ups without separate spray equipment.
ADDITIONAL INFORMATION
- Brand: Wattyl
- Range: Killrust Satin Enamel
- Product Code: 115313.530
- Barcode: 9300702189234
- Type: Anti-Corrosive Satin Enamel Aerosol Topcoat
- Size: 300g Aerosol
- Colour: Colorbond Pale Eucalypt
- Colour Reference: Pale Eucalypt / Meadow
- Finish: Satin
- Gloss Level: 30–35 at 60 Degrees
- Suitable For: Suitably Prepared Pre-Coated Metal Surfaces
- Application: Colorbond Colour Matching, Metal Touch-Ups and Maintenance
- Application Method: Aerosol Spray
- Interior/Exterior: Interior and Exterior
- Recommended Coats: 2 or More Coats
- Coverage: Up to 2m² per 300g Aerosol, Depending on Surface Texture, Porosity and Film Build
- Surface Dry: Approximately 30 Minutes
- Recoat Time: Approximately 24 Hours
- Full Cure: Approximately 7 Days
- Drying Conditions: 25°C and 50% Relative Humidity
- Surface Preparation: Ensure surfaces are clean, dry and free from loose paint, rust, grease and contaminants. Prepare and prime substrates where required before topcoating.