WATTYL Killrust Gloss Enamel Colorbond Woodland Grey 300g Metal Spray Paint

WATTYL Killrust Gloss Enamel Colorbond Woodland Grey 300g Metal Spray Paint

Wattyl Killrust Gloss Enamel Colorbond Woodland Grey 300g is an anti-corrosive epoxy enamel aerosol spray paint designed to protect metal surfaces while delivering a smooth, high-gloss finish. Its Woodland Grey colour is ideal for coordinating metalwork and refreshing existing coatings.

Suitable for interior and exterior metalwork, Killrust Epoxy Gloss Enamel helps protect against rust and corrosion on fences, gates, railings, gutters, downpipes and structural steelwork. It can be applied directly to properly prepared new and lightly rusted steel and wrought iron without a separate primer.

The ready-to-use 300g aerosol provides convenient application without separate spray equipment, making it practical for metal repairs, touch-ups and maintenance projects. Its durable enamel finish also offers washability and scuff resistance.

Key Features

• Anti-Corrosive Epoxy Formula: Helps protect metal surfaces against rust and corrosion.
• Colorbond Woodland Grey Colour: Provides a coordinated dark grey finish for metalwork and touch-ups.
• High-Gloss Finish: Delivers a smooth, decorative enamel coating.
• Direct-to-Metal Application: Can be applied to properly prepared new and lightly rusted steel and wrought iron without separate priming.
• Convenient Aerosol Format: Ready-to-use spray application for repairs and maintenance without separate spray equipment.

ADDITIONAL INFORMATION

• Brand: Wattyl
• Range: Killrust Epoxy Gloss Enamel
• Product Code: 115204.53
• Barcode: 9300702141690
• Type: Anti-Corrosive Epoxy Gloss Enamel Spray Paint
• Size: 300g Aerosol
• Colour: Colorbond Woodland Grey
• Finish: High Gloss
• Suitable For: Properly Prepared Steel, Wrought Iron and Suitably Primed Metal Surfaces
• Application: Metal Protection, Decorative Finishing and Touch-Ups
• Application Method: Aerosol Spray
• Interior/Exterior: Interior and Exterior
• Priming: No primer required on properly prepared new or lightly rusted steel and wrought iron. Other metal substrates may require suitable preparation and priming.
• Recommended Coats: 2 Coats
• Recoat Time: Approximately 16 Hours
• Application Temperature: 10–35°C
• Surface Preparation: Remove loose rust, flaking paint, grease, oil and other contaminants. Ensure surfaces are clean and dry before application.