WATTYL Killrust Epoxy Gloss Enamel White 4L Anti-Rust Metal Paint

WATTYL Killrust Epoxy Gloss Enamel White 4L Anti-Rust Metal Paint

Wattyl Killrust Epoxy Gloss Enamel is an ultra-premium, anti-corrosive metal paint designed to provide durable rust protection and an attractive high-gloss finish. Its advanced epoxy formulation delivers a tough, smooth coating with excellent covering power, washability and scuff resistance.

Suitable for interior and exterior applications, Killrust Epoxy Gloss Enamel can be applied directly to properly prepared new and lightly rusted steel or wrought iron without a separate primer. Non-ferrous metals, including galvanised iron, require suitable priming before applying the enamel.

Ideal for metal fences, gates, gutters, railings, downpipes and structural steelwork, this white 4L enamel provides a durable decorative and protective finish. Apply by brush, roller or spray gun for metal maintenance, restoration and painting projects.

Key Features

• Anti-Corrosive Epoxy Formula: Provides durable protection against rust and corrosion on suitable metal surfaces.
• Direct-to-Metal Application: Can be applied to properly prepared new and lightly rusted steel or wrought iron without priming.
• High-Gloss Finish: Creates a smooth, attractive white finish with excellent covering power.
• Scuff Resistant: Tough, washable coating designed to withstand everyday wear.
• Interior and Exterior Protection: Ideal for metal fences, gates, railings, gutters and structural steelwork.

ADDITIONAL INFORMATION

• Brand: Wattyl
• Range: Killrust Epoxy Gloss Enamel
• MPN: 115201.004
• Barcode: 9300702141539
• Type: Single-Pack Anti-Corrosive Epoxy Gloss Enamel
• Volume: 4L
• Colour: White
• Finish: High Gloss
• Suitable Surfaces: Properly Prepared Steel and Wrought Iron; Primed Non-Ferrous Metals Including Galvanised Iron
• Application: Interior and Exterior Metal Painting
• Coverage: Up to 14m²/L per Coat, Depending on Surface and Application Method
• Surface Dry: Approximately 4–6 Hours at 25°C and 50% Relative Humidity
• Recoat Time: Approximately 16 Hours
• Full Cure: Approximately 7 Days
• Minimum Wet Film Thickness: 75 Microns
• Minimum Dry Film Thickness: 38 Microns
• Application Methods: Brush, Roller or Spray Gun
• Clean-Up: Mineral Turpentine
• Priming Requirements: No Primer Required on Properly Prepared New or Lightly Rusted Steel and Wrought Iron; Prime Non-Ferrous Metals Before Topcoating