WATTYL Killrust Epoxy Gloss Enamel White 300g Metal Spray Paint

WATTYL Killrust Epoxy Gloss Enamel White 300g Metal Spray Paint

Wattyl Killrust Epoxy Gloss Enamel White 300g is an anti-corrosive aerosol spray paint designed to protect metal surfaces while delivering a smooth, high-gloss white finish. Its advanced epoxy enamel formulation provides a durable protective topcoat for interior and exterior metalwork.

Ideal for metal fences, gates, railings, gutters, downpipes and structural steelwork, Killrust Epoxy Gloss Enamel helps protect against rust and corrosion. It can be applied directly to properly prepared new and lightly rusted steel and wrought iron without a separate primer, while galvanised and other non-ferrous metals require suitable priming.

The ready-to-use 300g aerosol offers convenient application for repairs, touch-ups and maintenance without separate spray equipment. Its durable, washable and scuff-resistant gloss finish makes it suitable for decorative and protective metal coating projects.

Key Features

• Anti-Corrosive Epoxy Formula: Helps protect metal surfaces against rust and corrosion.
• High-Gloss White Finish: Provides a smooth, bright white coating with a durable gloss appearance.
• Direct-to-Metal Application: No separate primer required on properly prepared new or lightly rusted steel and wrought iron.
• Durable Protective Topcoat: Offers excellent washability, scuff resistance and covering power.
• Convenient Aerosol Application: Ready-to-use spray format for repairs, touch-ups and metal maintenance.

ADDITIONAL INFORMATION

• Brand: Wattyl
• Range: Killrust Epoxy Gloss Enamel
• Product Code: 115201.530
• Barcode: 9300702141560
• Type: Anti-Corrosive Epoxy Gloss Enamel Spray Paint
• Size: 300g Aerosol
• Colour: White
• Finish: High Gloss
• Suitable For: Properly Prepared Steel, Wrought Iron and Suitably Primed Non-Ferrous Metals
• Application: Metal Protection, Decorative Finishing and Touch-Ups
• Application Method: Aerosol Spray
• Interior/Exterior: Interior and Exterior
• Priming: No primer required on properly prepared new or lightly rusted steel and wrought iron. Galvanised iron and other non-ferrous metals require suitable priming.
• Recommended Coats: 1–2 Coats
• Coverage: Up to 3m² per aerosol, depending on surface and application conditions
• Surface Dry: Approximately 4–6 Hours
• Recoat Time: Approximately 16 Hours
• Full Cure: Approximately 7 Days
• Drying Conditions: 25°C and 50% Relative Humidity
• Application Temperature: 10–35°C
• Recommended Application Humidity: Below 80%
• Surface Preparation: Remove loose rust, flaking paint, grease, oil and dust. Ensure surfaces are clean and dry before painting.