WATTYL Killrust Epoxy Gloss Enamel Ultra Blue 300g Metal Spray Paint 3 Pack

WATTYL Killrust Epoxy Gloss Enamel Ultra Blue 300g Metal Spray Paint 3 Pack

Wattyl Killrust Epoxy Gloss Enamel Ultra Blue 300g Metal Spray Paint 3 Pack provides a convenient solution for protecting and finishing metal surfaces. This bundle includes three individual 300g aerosol cans, providing 900g of anti-corrosive epoxy enamel spray paint in total.

Designed for interior and exterior metalwork, Killrust Epoxy Gloss Enamel helps protect against rust and corrosion while delivering a smooth, vibrant Ultra Blue high-gloss finish. Ideal for metal fences, gates, railings and general steelwork, it can be applied directly to properly prepared new and lightly rusted steel and wrought iron without a separate primer.

Each ready-to-use aerosol allows convenient application without separate spray equipment. With three individual cans, this bundle is a practical choice for multiple repairs, touch-ups, decorative metal finishing and ongoing maintenance.

Key Features

• 3 Pack Bundle: Includes three individual 300g aerosol cans, providing 900g of spray paint in total.
• Anti-Corrosive Epoxy Formula: Helps protect properly prepared metal surfaces against rust and corrosion.
• Ultra Blue Gloss Finish: Delivers a vibrant blue colour with a smooth, high-gloss appearance.
• Direct-to-Metal Application: Suitable for properly prepared new and lightly rusted steel and wrought iron without separate priming.
• Convenient Aerosol Application: Ready-to-use spray format for metal touch-ups, repairs and maintenance.

ADDITIONAL INFORMATION

• Brand: Wattyl
• Range: Killrust Epoxy Gloss Enamel
• Individual Product Code: 115215.53
• Individual Can Barcode: 9300702142093
• Type: Anti-Corrosive Epoxy Gloss Enamel Spray Paint
• Colour: Ultra Blue
• Finish: High Gloss
• Can Size: 300g
• Pack Quantity: 3 Aerosol Cans
• Total Net Contents: 900g
• Bundle Contents: 3 x Wattyl Killrust Epoxy Gloss Enamel Ultra Blue 300g Spray Paint
• Suitable For: Properly Prepared Steel, Wrought Iron and Suitably Primed Non-Ferrous Metals
• Application: Metal Protection, Decorative Finishing and Touch-Ups
• Application Method: Aerosol Spray
• Interior/Exterior: Interior and Exterior
• Priming: No primer required on properly prepared new or lightly rusted steel and wrought iron. Galvanised iron and other non-ferrous metals require suitable priming.
• Recommended Coats: 2 Coats
• Surface Dry: Approximately 4–6 Hours
• Recoat Time: Approximately 16 Hours
• Full Cure: Approximately 7 Days
• Drying Conditions: 25°C and 50% Relative Humidity
• Application Temperature: 10–35°C
• Surface Preparation: Remove loose rust, flaking paint, grease, oil and dust. Ensure the surface is clean and dry before painting.