WATTYL Killrust Epoxy Gloss Enamel Ultra Blue 300g Metal Spray Paint

WATTYL Killrust Epoxy Gloss Enamel Ultra Blue 300g Metal Spray Paint

Wattyl Killrust Epoxy Gloss Enamel Ultra Blue 300g is a durable, anti-corrosive aerosol spray paint designed to protect metal surfaces while delivering a smooth, high-gloss blue finish. Its advanced epoxy enamel formulation combines protective performance with an attractive decorative coating for interior and exterior metalwork.

Ideal for metal fences, gates, railings, gutters, downpipes and structural steelwork, Killrust Epoxy Gloss Enamel helps protect against rust and corrosion. It can be applied directly to properly prepared new and lightly rusted steel and wrought iron without a separate primer, while galvanised and other non-ferrous metals require suitable priming.

The ready-to-use 300g aerosol makes metal touch-ups, repairs and maintenance convenient without separate spray equipment. Its vibrant Ultra Blue colour provides a distinctive high-gloss finish with excellent washability and scuff resistance.

Key Features

• Anti-Corrosive Epoxy Formula: Helps protect steel and wrought iron against rust and corrosion.
• Ultra Blue Gloss Finish: Delivers a vibrant blue colour with a smooth, high-gloss appearance.
• Direct-to-Metal Application: No separate primer required on properly prepared new or lightly rusted steel and wrought iron.
• Durable Protective Topcoat: Offers excellent washability, scuff resistance and covering power.
• Convenient Aerosol Application: Ready-to-use spray format for metal touch-ups, repairs and maintenance.

ADDITIONAL INFORMATION

• Brand: Wattyl
• Range: Killrust Epoxy Gloss Enamel
• Product Code: 115215.53
• Barcode: 9300702142093
• Type: Anti-Corrosive Epoxy Gloss Enamel Spray Paint
• Size: 300g Aerosol
• Colour: Ultra Blue
• Finish: High Gloss
• Suitable For: Properly Prepared Steel, Wrought Iron and Suitably Primed Non-Ferrous Metals
• Application: Metal Protection, Decorative Finishing and Touch-Ups
• Application Method: Aerosol Spray
• Interior/Exterior: Interior and Exterior
• Priming: No primer required on properly prepared new or lightly rusted steel and wrought iron. Galvanised iron and other non-ferrous metals require suitable priming.
• Recommended Coats: 2 Coats
• Surface Dry: Approximately 4–6 Hours
• Recoat Time: Approximately 16 Hours
• Full Cure: Approximately 7 Days
• Drying Conditions: 25°C and 50% Relative Humidity
• Application Temperature: 10–35°C
• Surface Preparation: Remove loose rust, flaking paint, grease, oil and dust. Ensure the surface is clean and dry before painting.