WATTYL Killrust Epoxy Gloss Enamel Ultra Blue 4L Anti-Rust Metal Paint

WATTYL Killrust Epoxy Gloss Enamel Ultra Blue 4L Anti-Rust Metal Paint

Wattyl Killrust Epoxy Gloss Enamel is an ultra-premium anti-corrosive metal paint designed to deliver durable protection and an attractive high-gloss finish. This Ultra Blue 4L enamel provides a decorative and protective coating for interior and exterior metal surfaces.

Its advanced epoxy enamel formulation offers excellent covering power, washability and scuff resistance. Killrust Epoxy Gloss Enamel can be applied directly to properly prepared new and lightly rusted steel or wrought iron without a separate primer. Non-ferrous metals, including galvanised iron, require suitable priming before topcoating.

Ideal for metal fences, gates, railings, gutters, downpipes and structural steelwork, this enamel provides a smooth, hard-wearing finish. Suitable for application by brush, roller or spray gun, it is an excellent choice for metal maintenance, restoration and painting projects.

Key Features

• Anti-Corrosive Epoxy Formula: Helps protect suitable metal surfaces against rust and corrosion.
• High-Gloss Ultra Blue Finish: Delivers a smooth, attractive blue finish for decorative metalwork.
• Direct-to-Metal Application: Can be applied to properly prepared new and lightly rusted steel or wrought iron without a separate primer.
• Durable and Washable: Provides excellent scuff resistance, washability and covering power.
• Interior and Exterior Use: Suitable for metal fences, gates, railings and structural steelwork.

ADDITIONAL INFORMATION

• Brand: Wattyl
• Range: Killrust Epoxy Gloss Enamel
• MPN: 115215.004
• Barcode: 9300702142079
• Type: Anti-Corrosive Epoxy Gloss Enamel Topcoat
• Volume: 4L
• Colour: Ultra Blue
• Finish: High Gloss
• Suitable Surfaces: Properly Prepared Steel and Wrought Iron; Suitably Primed Non-Ferrous Metals Including Galvanised Iron
• Application: Interior and Exterior Metal Painting
• Coverage: Up to 14m²/L per Coat, Depending on Surface and Application Method
• Recommended Coats: 2
• Surface Dry: Approximately 4–6 Hours at 25°C and 50% Relative Humidity
• Recoat Time: Approximately 16 Hours
• Full Cure: Approximately 7 Days
• Minimum Wet Film Thickness: 75 Microns
• Minimum Dry Film Thickness: 38 Microns
• Application Methods: Brush, Roller or Spray Gun
• Clean-Up: Mineral Turpentine
• Priming Requirements: No Primer Required on Properly Prepared New or Lightly Rusted Steel and Wrought Iron; Prime Non-Ferrous Metals Before Topcoating