WATTYL Killrust Epoxy Gloss Enamel Sungold Yellow 4L Anti-Rust Metal Paint

WATTYL Killrust Epoxy Gloss Enamel Sungold Yellow 4L Anti-Rust Metal Paint

Wattyl Killrust Epoxy Gloss Enamel is an ultra-premium anti-corrosive metal paint designed to deliver lasting protection and an attractive high-gloss finish. This Sungold Yellow 4L enamel combines vibrant decorative colour with a durable protective coating for interior and exterior metal surfaces.

Its advanced epoxy formula offers excellent covering power, washability and scuff resistance. Killrust Epoxy Gloss Enamel can be applied directly to properly prepared new and lightly rusted steel or wrought iron without a separate primer. Non-ferrous metals, including galvanised iron, require suitable priming before topcoating.

Ideal for fences, gates, railings, gutters, downpipes and structural steelwork, this enamel is suitable for brush, roller or spray application. It provides a practical solution for protecting and refreshing metalwork around homes, workshops and commercial properties.

Key Features

• Anti-Corrosive Epoxy Formula: Helps protect suitable metal surfaces against rust and corrosion.
• High-Gloss Sungold Finish: Delivers an attractive yellow finish with excellent covering power.
• Direct-to-Metal Application: Can be applied to properly prepared new and lightly rusted steel or wrought iron without a separate primer.
• Durable and Washable: Provides a smooth, scuff-resistant coating for everyday use.
• Interior and Exterior Use: Suitable for metal fences, gates, railings and structural steelwork.

ADDITIONAL INFORMATION

• Brand: Wattyl
• Range: Killrust Epoxy Gloss Enamel
• MPN: 115214.004
• Barcode: 9300702142031
• Type: Anti-Corrosive Epoxy Gloss Enamel Topcoat
• Volume: 4L
• Colour: Sungold Yellow
• Finish: High Gloss
• Suitable Surfaces: Properly Prepared Steel and Wrought Iron; Suitably Primed Non-Ferrous Metals Including Galvanised Iron
• Application: Interior and Exterior Metal Painting
• Coverage: Up to 14m²/L per Coat, Depending on Surface and Application Method
• Surface Dry: Approximately 4–6 Hours at 25°C and 50% Relative Humidity
• Recoat Time: Approximately 16 Hours
• Full Cure: Approximately 7 Days
• Minimum Wet Film Thickness: 75 Microns
• Minimum Dry Film Thickness: 38 Microns
• Application Methods: Brush, Roller or Spray Gun
• Clean-Up: Mineral Turpentine
• Priming Requirements: No Primer Required on Properly Prepared New or Lightly Rusted Steel and Wrought Iron; Prime Non-Ferrous Metals Before Topcoating