WATTYL Killrust Epoxy Gloss Enamel Sungold 300g Metal Spray Paint

WATTYL Killrust Epoxy Gloss Enamel Sungold 300g Metal Spray Paint

Wattyl Killrust Epoxy Gloss Enamel Sungold 300g is an anti-corrosive aerosol spray paint designed to protect metal surfaces while delivering a vibrant Sungold Yellow high-gloss finish. Its advanced epoxy enamel formulation combines durable metal protection with an attractive decorative coating.

Ideal for metal fences, gates, railings, gutters, downpipes and structural steelwork, Killrust Epoxy Gloss Enamel helps protect against rust and corrosion. It can be applied directly to properly prepared new and lightly rusted steel and wrought iron without a separate primer, making it suitable for metal restoration and maintenance.

The ready-to-use 300g aerosol provides convenient application for smaller projects, repairs and touch-ups without separate spray equipment. Its smooth, washable and scuff-resistant finish is suitable for interior and exterior metalwork.

Key Features

• Anti-Corrosive Epoxy Formula: Helps protect metal surfaces against rust and corrosion.
• Sungold Yellow Gloss Finish: Delivers a vibrant golden-yellow colour with an attractive high-gloss appearance.
• Direct-to-Metal Application: No separate primer required on properly prepared new or lightly rusted steel and wrought iron.
• Durable Protective Topcoat: Provides a smooth, washable and scuff-resistant finish for metalwork.
• Convenient Aerosol Application: Ready-to-use spray format for metal touch-ups, repairs and maintenance.

ADDITIONAL INFORMATION

• Brand: Wattyl
• Range: Killrust Epoxy Gloss Enamel
• Product Code: 115214.53
• Barcode: 9300702142055
• Type: Anti-Corrosive Epoxy Gloss Enamel Spray Paint
• Size: 300g Aerosol
• Colour: Sungold Yellow
• Finish: High Gloss
• Suitable For: Properly Prepared Steel, Wrought Iron and Suitably Primed Non-Ferrous Metals
• Application: Metal Protection, Decorative Finishing and Touch-Ups
• Application Method: Aerosol Spray
• Interior/Exterior: Interior and Exterior
• Priming: No primer required on properly prepared new or lightly rusted steel and wrought iron. Galvanised iron and other non-ferrous metals require suitable priming.
• Recommended Coats: 2 Coats
• Surface Dry: Approximately 4–6 Hours
• Recoat Time: Approximately 16 Hours
• Full Cure: Approximately 7 Days
• Drying Conditions: 25°C and 50% Relative Humidity
• Application Temperature: 10–35°C
• Surface Preparation: Remove loose rust, flaking paint, grease, oil and dust. Ensure the surface is clean and dry before painting.