WATTYL Killrust Epoxy Gloss Enamel Strong Tint Base 4L Anti-Rust Metal Paint

WATTYL Killrust Epoxy Gloss Enamel Strong Tint Base 4L Anti-Rust Metal Paint

Wattyl Killrust Epoxy Gloss Enamel Strong Tint Base is an ultra-premium anti-corrosive metal paint designed for tinting to compatible colours. Its advanced epoxy enamel formulation provides durable metal protection with a smooth, high-gloss finish for interior and exterior applications.

Killrust Epoxy Gloss Enamel can be applied directly to properly prepared new and lightly rusted steel or wrought iron without a separate primer. Non-ferrous metals, including galvanised iron, require suitable priming before topcoating. The finished coating offers excellent washability, scuff resistance and covering power.

Supplied as a 4L Strong Tint Base, this product is intended for tinting using Wattyl's compatible Ecotint colour system. It is ideal for metal fences, gates, railings, gutters, downpipes and structural steelwork. The final colour depends on the selected tint formula.

Key Features

• Strong Tint Base: Designed for tinting to compatible colours rather than supplied as a finished, pre-mixed colour.
• Anti-Corrosive Epoxy Formula: Helps protect suitable metal surfaces against rust and corrosion.
• High-Gloss Finish: Produces a smooth, durable and decorative finish after appropriate tinting.
• Direct-to-Metal Application: No separate primer required on properly prepared new or lightly rusted steel and wrought iron.
• Durable and Washable: Offers excellent scuff resistance, washability and covering power for interior and exterior metalwork.

ADDITIONAL INFORMATION

• Brand: Wattyl
• Range: Killrust Epoxy Gloss Enamel
• MPN: 115219.004
• Barcode: 9300702255816
• Type: Anti-Corrosive Epoxy Gloss Enamel Tint Base
• Volume: 4L
• Colour: Strong Tint Base (STB)
• Finish: High Gloss
• Tinting System: Wattyl Ecotint
• Suitable Surfaces: Properly Prepared Steel and Wrought Iron; Suitably Primed Non-Ferrous Metals Including Galvanised Iron
• Application: Interior and Exterior Metal Painting
• Coverage: Up to 14m²/L per Coat, Depending on Surface and Application Method
• Surface Dry: Approximately 4–6 Hours at 25°C and 50% Relative Humidity
• Recoat Time: Approximately 16 Hours
• Full Cure: Approximately 7 Days
• Minimum Wet Film Thickness: 75 Microns
• Minimum Dry Film Thickness: 38 Microns
• Application Methods: Brush, Roller or Spray Gun
• Clean-Up: Mineral Turpentine
• Priming Requirements: No Primer Required on Properly Prepared New or Lightly Rusted Steel and Wrought Iron; Prime Non-Ferrous Metals Before Topcoating
• Important: Tint Base Product; Final Colour Depends on the Selected Tint Formula