WATTYL Killrust Epoxy Gloss Enamel Ocean Blue 4L Anti-Rust Metal Paint

WATTYL Killrust Epoxy Gloss Enamel Ocean Blue 4L Anti-Rust Metal Paint

Wattyl Killrust Epoxy Gloss Enamel is an ultra-premium anti-corrosive topcoat formulated to protect metal surfaces while delivering a smooth, durable gloss finish. This Ocean Blue 4L enamel combines decorative colour with practical rust protection for interior and exterior metal painting projects.

The advanced epoxy enamel formula can be applied directly to properly prepared new or lightly rusted steel and wrought iron without a separate primer. Non-ferrous metals, including galvanised iron, require suitable priming before applying the enamel.

Ideal for metal fences, gates, railings, gutters, downpipes and structural steelwork, Killrust Epoxy Gloss Enamel offers excellent covering power, washability and scuff resistance. Apply by brush, roller or spray gun for a durable protective finish.

Key Features

• Anti-Corrosive Protection: Advanced epoxy enamel formula helps protect suitable metal surfaces against rust and corrosion.
• Direct-to-Metal Application: No separate primer required on properly prepared new or lightly rusted steel and wrought iron.
• Gloss Ocean Blue Finish: Provides an attractive, smooth decorative coating for metal surfaces.
• Durable and Washable: Offers excellent scuff resistance, washability and covering power.
• Interior and Exterior Use: Suitable for fences, gates, railings, gutters and structural steelwork.

ADDITIONAL INFORMATION

• Brand: Wattyl
• Range: Killrust Epoxy Gloss Enamel
• MPN: 115211.004
• Barcode: 9300702141904
• Type: Anti-Corrosive Epoxy Enamel Topcoat
• Volume: 4L
• Colour: Ocean Blue
• Finish: Gloss
• Suitable Surfaces: Properly Prepared Steel and Wrought Iron; Suitably Primed Non-Ferrous Metals Including Galvanised Iron
• Application: Interior and Exterior Metal Painting
• Coverage: Up to 14m²/L per Coat, Depending on Surface and Application Method
• Recommended Coats: 2
• Surface Dry: Approximately 4–6 Hours at 25°C and 50% Relative Humidity
• Recoat Time: Approximately 16 Hours
• Full Cure: Approximately 7 Days
• Minimum Wet Film Thickness: 75 Microns
• Minimum Dry Film Thickness: 38 Microns
• Application Methods: Brush, Roller or Spray Gun
• Clean-Up: Mineral Turpentine
• Priming Requirements: No Primer Required on Properly Prepared New or Lightly Rusted Steel and Wrought Iron; Prime Non-Ferrous Metals Before Topcoating