WATTYL Killrust Epoxy Gloss Enamel Ocean 300g Metal Spray Paint

WATTYL Killrust Epoxy Gloss Enamel Ocean 300g Metal Spray Paint

Wattyl Killrust Epoxy Gloss Enamel Ocean 300g is a durable, anti-corrosive aerosol spray paint designed to protect metal surfaces while delivering a smooth, high-gloss Ocean Blue finish. Its epoxy enamel formulation provides a protective topcoat for interior and exterior metalwork.

Ideal for metal fences, gates, railings, gutters, downpipes and structural steelwork, Killrust Epoxy Gloss Enamel helps protect against rust and corrosion. It can be applied directly to properly prepared new and lightly rusted steel and wrought iron without a separate primer.

The ready-to-use 300g aerosol provides convenient application for smaller projects, touch-ups and maintenance without separate spray equipment. Its Ocean Blue colour delivers a decorative gloss finish with durable metal protection.

Key Features

• Anti-Corrosive Epoxy Formula: Helps protect metal surfaces against rust and corrosion.
• Ocean Blue Gloss Finish: Provides a smooth, attractive blue coating with a high-gloss appearance.
• Direct-to-Metal Application: No separate primer required on properly prepared new or lightly rusted steel and wrought iron.
• Durable Protective Topcoat: Designed for metal fences, gates, railings and general steelwork.
• Convenient Aerosol Application: Ready-to-use spray format for metal touch-ups, repairs and maintenance.

ADDITIONAL INFORMATION

• Brand: Wattyl
• Range: Killrust Epoxy Gloss Enamel
• Product Code: 115211.53
• Barcode: 9300702141928
• Type: Anti-Corrosive Epoxy Gloss Enamel Spray Paint
• Size: 300g Aerosol
• Colour: Ocean Blue
• Finish: High Gloss
• Suitable For: Properly Prepared Steel, Wrought Iron and Suitably Primed Non-Ferrous Metals
• Application: Metal Protection, Decorative Finishing and Touch-Ups
• Application Method: Aerosol Spray
• Interior/Exterior: Interior and Exterior
• Priming: No primer required on properly prepared new or lightly rusted steel and wrought iron. Galvanised iron and other non-ferrous metals require suitable priming.
• Recommended Coats: 2 Coats
• Recoat Time: Approximately 16 Hours under recommended application conditions
• Application Temperature: 10–35°C
• Surface Preparation: Remove loose rust, flaking paint, grease, oil and dust. Ensure surfaces are clean and dry before painting.