WATTYL Killrust Epoxy Gloss Enamel Mid Tint Base 4L Anti-Rust Metal Paint

WATTYL Killrust Epoxy Gloss Enamel Mid Tint Base 4L Anti-Rust Metal Paint

Wattyl Killrust Epoxy Gloss Enamel Mid Tint Base is an ultra-premium anti-corrosive metal paint formulated for tinting to compatible colours. Its advanced epoxy enamel formula provides durable protection for metal surfaces with an attractive high-gloss finish.

Suitable for interior and exterior applications, Killrust Epoxy Gloss Enamel can be applied directly to properly prepared new and lightly rusted steel or wrought iron without a separate primer. Non-ferrous metals, including galvanised iron, must be suitably primed before topcoating.

Ideal for fences, gates, railings, gutters, downpipes and structural steelwork, this 4L Mid Tint Base is designed for use with an appropriate Wattyl tinting system. The final paint colour depends on the selected tint formula.

Key Features

• Mid Tint Base: Designed for tinting to compatible paint colours rather than supplied as a finished factory colour.
• Anti-Corrosive Epoxy Formula: Helps protect suitable metal surfaces against rust and corrosion.
• High-Gloss Finish: Produces a smooth, durable decorative finish after appropriate tinting.
• Direct-to-Metal Application: Can be applied to properly prepared new or lightly rusted steel and wrought iron without separate priming.
• Durable and Washable: Offers excellent scuff resistance, washability and covering power for interior and exterior metalwork.

ADDITIONAL INFORMATION

• Brand: Wattyl
• Range: Killrust Epoxy Gloss Enamel
• MPN: 115218.004
• Barcode: 9300702255793
• Type: Anti-Corrosive Epoxy Enamel Tint Base
• Volume: 4L
• Colour: Mid Tint Base (MTB)
• Finish: High Gloss
• Tinting: Ecotint Tinting System for Compatible Wattyl Colour Designer and Other Specified Colours
• Suitable Surfaces: Properly Prepared Steel and Wrought Iron; Suitably Primed Non-Ferrous Metals Including Galvanised Iron
• Application: Interior and Exterior Metal Painting
• Coverage: Up to 14m²/L per Coat, Depending on Surface and Application Method
• Recommended Coats: 2
• Surface Dry: Approximately 4–6 Hours at 25°C and 50% Relative Humidity
• Recoat Time: Approximately 16 Hours
• Full Cure: Approximately 7 Days
• Minimum Wet Film Thickness: 75 Microns
• Minimum Dry Film Thickness: 38 Microns
• Application Methods: Brush, Roller or Spray Gun
• Clean-Up: Mineral Turpentine
• Important: Tint Base Product; Final Colour Depends on the Selected Tint Formula