WATTYL Killrust Epoxy Gloss Enamel Light Tint Base 4L Anti-Rust Metal Paint

WATTYL Killrust Epoxy Gloss Enamel Light Tint Base 4L Anti-Rust Metal Paint

Wattyl Killrust Epoxy Gloss Enamel Light Tint Base is an ultra-premium, anti-corrosive metal paint designed to be tinted to compatible colours. Its advanced epoxy enamel formulation provides durable metal protection with a smooth, attractive gloss finish.

Designed for interior and exterior use, Killrust Epoxy Gloss Enamel can be applied directly to properly prepared new or lightly rusted steel and wrought iron without a separate primer. Non-ferrous metals, including galvanised iron, require suitable priming before topcoating.

Ideal for metal fences, gates, railings, gutters, downpipes and structural steelwork, this 4L Light Tint Base allows customers to select a compatible tinted colour while benefiting from the durability, washability and scuff resistance of Wattyl Killrust Epoxy Gloss Enamel.

Key Features

• Light Tint Base: Designed for tinting to compatible Wattyl paint colours rather than use as a standard pre-mixed colour.
• Anti-Corrosive Epoxy Formula: Helps protect suitable metal surfaces against rust and corrosion.
• Gloss Finish: Produces a smooth, durable and washable finish after appropriate tinting.
• Direct-to-Metal Application: Suitable for properly prepared new or lightly rusted steel and wrought iron without separate priming.
• Interior and Exterior Use: Ideal for fences, gates, railings and general metal protection.

ADDITIONAL INFORMATION

• Brand: Wattyl
• Range: Killrust Epoxy Gloss Enamel
• MPN: 115217.004
• Barcode: 9300702255779
• Type: Anti-Corrosive Epoxy Enamel Tint Base
• Volume: 4L
• Colour: Light Tint Base (LTB)
• Finish: High Gloss
• Tinting: Compatible Wattyl Colour Designer Colours Using the Specified Tinting System
• Suitable Surfaces: Properly Prepared Steel and Wrought Iron; Suitably Primed Non-Ferrous Metals
• Application: Interior and Exterior Metal Painting
• Coverage: Up to 14m²/L per Coat, Depending on Surface and Application Method
• Recommended Coats: 2
• Surface Dry: Approximately 4–6 Hours at 25°C and 50% Relative Humidity
• Recoat Time: Approximately 16 Hours
• Full Cure: Approximately 7 Days
• Minimum Wet Film Thickness: 75 Microns
• Minimum Dry Film Thickness: 38 Microns
• Application Methods: Brush, Roller or Spray Gun
• Clean-Up: Mineral Turpentine
• Important: Tint Base Product; Final Colour Depends on the Selected Tint Formula