WATTYL Killrust Epoxy Gloss Enamel Deep Brunswick Green 300g Metal Spray Paint

WATTYL Killrust Epoxy Gloss Enamel Deep Brunswick Green 300g Metal Spray Paint

Wattyl Killrust Epoxy Gloss Enamel Deep Brunswick Green 300g is an anti-corrosive aerosol topcoat designed to protect metal surfaces while delivering a smooth, durable high-gloss finish. Its epoxy enamel formulation combines decorative colour with long-lasting metal protection for interior and exterior applications.

Ideal for metal fences, gates, railings, gutters, downpipes and structural steelwork, Killrust Epoxy Gloss Enamel helps protect against rust and corrosion. It can be applied directly to properly prepared new and lightly rusted steel and wrought iron without a separate primer, while galvanised and other non-ferrous metals require suitable priming.

The ready-to-use 300g aerosol is convenient for smaller painting projects, touch-ups and maintenance without separate spray equipment. Its Deep Brunswick Green colour provides a traditional dark green gloss finish suitable for decorative and protective metalwork.

Key Features

• Anti-Corrosive Epoxy Formula: Helps protect steel and wrought iron against rust and corrosion.
• Deep Brunswick Green Gloss Finish: Delivers a smooth, durable dark green coating with a high-gloss appearance.
• Direct-to-Metal Application: No separate primer required on properly prepared new or lightly rusted steel and wrought iron.
• Durable Protective Topcoat: Offers a washable, scuff-resistant finish for metal fences, gates, railings and general steelwork.
• Convenient Aerosol Application: Ready-to-use spray format for metal touch-ups, repairs and maintenance.

ADDITIONAL INFORMATION

• Brand: Wattyl
• Range: Killrust Epoxy Gloss Enamel
• Product Code: 115205.53
• Barcode: 9300702141737
• Type: Anti-Corrosive Epoxy Enamel Spray Paint
• Size: 300g Aerosol
• Colour: Deep Brunswick Green
• Finish: High Gloss
• Suitable For: Properly Prepared Steel, Wrought Iron and Suitably Primed Non-Ferrous Metals
• Application: Metal Protection, Decorative Finishing and Touch-Ups
• Application Method: Aerosol Spray
• Interior/Exterior: Interior and Exterior
• Priming: No primer required on properly prepared new or lightly rusted steel and wrought iron. Galvanised iron and other non-ferrous metals require suitable priming.
• Coverage: Up to 3m² per 300g Aerosol, Depending on Surface and Application
• Recommended Coats: 1–2 Coats
• Surface Dry: Approximately 4–6 Hours
• Recoat Time: Approximately 16 Hours
• Full Cure: Approximately 7 Days
• Drying Conditions: 25°C and 50% Relative Humidity
• Application Temperature: 10–35°C
• Surface Preparation: Remove loose rust, flaking paint, grease, oil and dust. Ensure the surface is clean and dry before painting.