WATTYL Killrust Epoxy Gloss Enamel Black 300g Metal Spray Paint 3 Pack
Couldn't load pickup availability
WATTYL Killrust Epoxy Gloss Enamel Black 300g Metal Spray Paint 3 Pack
Wattyl Killrust Epoxy Gloss Enamel Black 300g Metal Spray Paint 3 Pack provides a convenient solution for protecting and finishing metal surfaces. This bundle includes three individual 300g aerosol cans, providing 900g of anti-corrosive epoxy enamel spray paint in total.
Designed for interior and exterior metalwork, Killrust Epoxy Gloss Enamel helps protect against rust and corrosion while delivering a smooth, high-gloss black finish. Ideal for metal fences, gates, railings and general steelwork, it can be applied directly to properly prepared new and lightly rusted steel and wrought iron without a separate primer.
Each ready-to-use aerosol allows convenient application without separate spray equipment. With three individual cans, this bundle is a practical choice for multiple repairs, touch-ups and ongoing metal maintenance, providing a durable, scuff-resistant and washable finish.
Key Features
- 3 Pack Bundle: Includes three individual 300g aerosol cans, providing 900g of spray paint in total.
- Anti-Corrosive Epoxy Formula: Helps protect properly prepared metal surfaces against rust and corrosion.
- High-Gloss Black Finish: Delivers a smooth, durable black coating with an attractive glossy appearance.
- Direct-to-Metal Application: Suitable for properly prepared new and lightly rusted steel and wrought iron without separate priming.
- Convenient Aerosol Application: Ready-to-use spray format for metal touch-ups, repairs and maintenance.
ADDITIONAL INFORMATION
- Brand: Wattyl
- Range: Killrust Epoxy Gloss Enamel
- Individual Product Code: 115202.53
- Individual Can Barcode: 9300702141614
- Type: Anti-Corrosive Epoxy Gloss Enamel Spray Paint
- Colour: Black
- Finish: High Gloss
- Can Size: 300g
- Pack Quantity: 3 Aerosol Cans
- Total Net Contents: 900g
- Bundle Contents: 3 x Wattyl Killrust Epoxy Gloss Enamel Black 300g Spray Paint
- Suitable For: Properly Prepared Steel, Wrought Iron and Suitably Primed Non-Ferrous Metals
- Application: Metal Protection, Decorative Finishing and Touch-Ups
- Application Method: Aerosol Spray
- Interior/Exterior: Interior and Exterior
- Priming: No primer required on properly prepared new or lightly rusted steel and wrought iron. Galvanised iron and other non-ferrous metals require suitable priming.
- Coverage: Up to 3m² per 300g Aerosol, Depending on Surface and Application
- Recommended Coats: 1–2 Coats
- Surface Dry: Approximately 4–6 Hours
- Recoat Time: Approximately 16 Hours
- Full Cure: Approximately 7 Days
- Drying Conditions: 25°C and 50% Relative Humidity
- Application Temperature: 10–35°C
- Surface Preparation: Remove loose rust, flaking paint, oil, grease and dust. Ensure surfaces are clean and dry before painting.
- Aerosol Spray Distance: Approximately 25cm from the surface