WATTYL Killrust Epoxy Gloss Enamel Black 300g Metal Spray Paint

WATTYL Killrust Epoxy Gloss Enamel Black 300g Metal Spray Paint

Wattyl Killrust Epoxy Gloss Enamel Black 300g is a durable, anti-corrosive aerosol spray paint designed to protect metal surfaces while delivering a smooth, high-gloss black finish. Its advanced epoxy enamel formulation provides a protective topcoat for interior and exterior metalwork.

Ideal for metal fences, gates, railings, gutters, downpipes and structural steelwork, Killrust Epoxy Gloss Enamel helps protect against rust and corrosion. It can be applied directly to properly prepared new and lightly rusted steel and wrought iron without a separate primer, making it a practical choice for metal protection and maintenance.

The ready-to-use 300g aerosol provides convenient application for smaller projects, repairs and touch-ups without separate spray equipment. Its durable, scuff-resistant finish offers excellent washability and a clean gloss appearance.

Key Features

• Anti-Corrosive Epoxy Formula: Helps protect metal surfaces against rust and corrosion.
• High-Gloss Black Finish: Provides a smooth, durable black coating with an attractive glossy appearance.
• Direct-to-Metal Application: No separate primer required on properly prepared new or lightly rusted steel and wrought iron.
• Durable Protective Topcoat: Offers scuff resistance, washability and excellent covering power.
• Convenient Aerosol Application: Ready-to-use spray format for metal touch-ups, repairs and maintenance.

ADDITIONAL INFORMATION

• Brand: Wattyl
• Range: Killrust Epoxy Gloss Enamel
• Product Code: 115202.53
• Barcode: 9300702141614
• Type: Anti-Corrosive Epoxy Gloss Enamel Spray Paint
• Size: 300g Aerosol
• Colour: Black
• Finish: High Gloss
• Suitable For: Properly Prepared Steel, Wrought Iron and Suitably Primed Non-Ferrous Metals
• Application: Metal Protection, Decorative Finishing and Touch-Ups
• Application Method: Aerosol Spray
• Interior/Exterior: Interior and Exterior
• Priming: No primer required on properly prepared new or lightly rusted steel and wrought iron. Galvanised iron and other non-ferrous metals require suitable priming.
• Coverage: Up to 3m² per 300g Aerosol, Depending on Surface and Application
• Recommended Coats: 1–2 Coats
• Surface Dry: Approximately 4–6 Hours
• Recoat Time: Approximately 16 Hours
• Full Cure: Approximately 7 Days
• Drying Conditions: 25°C and 50% Relative Humidity
• Application Temperature: 10–35°C
• Surface Preparation: Remove loose rust, flaking paint, oil, grease and dust. Ensure surfaces are clean and dry before painting.
• Aerosol Spray Distance: Approximately 25cm from the surface