WATTYL Killrust Epoxy Gloss Enamel Aluminium Silver 4L Anti-Rust Metal Paint

WATTYL Killrust Epoxy Gloss Enamel Aluminium Silver 4L Anti-Rust Metal Paint

Wattyl Killrust Epoxy Gloss Enamel is an ultra-premium, anti-corrosive metal paint designed to provide durable protection with an attractive gloss finish. This Aluminium Silver colour offers a metallic appearance for interior and exterior metal painting projects.

Its advanced epoxy enamel formula provides excellent covering power, washability and scuff resistance. Killrust Epoxy Gloss Enamel can be applied directly to properly prepared new and lightly rusted steel or wrought iron without a separate primer. Non-ferrous metals, including galvanised iron and aluminium, require suitable priming before topcoating.

Ideal for metal fences, gates, railings, gutters, downpipes and structural steelwork, this 4L enamel delivers a decorative and protective finish. Suitable for application by brush, roller or spray gun.

Key Features

• Anti-Corrosive Epoxy Formula: Helps protect suitable metal surfaces against rust and corrosion.
• Aluminium Silver Finish: Provides an attractive metallic silver appearance with a gloss finish.
• Direct-to-Metal Application: No separate primer required on properly prepared new or lightly rusted steel and wrought iron.
• Durable and Washable: Offers excellent scuff resistance, washability and covering power.
• Interior and Exterior Use: Suitable for metal fences, gates, railings, gutters and structural steelwork.

ADDITIONAL INFORMATION

• Brand: Wattyl
• Range: Killrust Epoxy Gloss Enamel
• MPN: 115213.004
• Barcode: 9300702141980
• Type: Anti-Corrosive Epoxy Enamel Topcoat
• Volume: 4L
• Colour: Aluminium Silver
• Finish: Gloss / Metallic Appearance
• Suitable Surfaces: Properly Prepared Steel and Wrought Iron; Suitably Primed Non-Ferrous Metals
• Application: Interior and Exterior Metal Painting
• Coverage: Up to 14m²/L per Coat, Depending on Surface and Application Method
• Recommended Coats: 2
• Surface Dry: Approximately 4–6 Hours at 25°C and 50% Relative Humidity
• Recoat Time: Approximately 16 Hours
• Full Cure: Approximately 7 Days
• Minimum Wet Film Thickness: 75 Microns
• Minimum Dry Film Thickness: 38 Microns
• Application Methods: Brush, Roller or Spray Gun
• Clean-Up: Mineral Turpentine
• Priming Requirements: No Primer Required on Properly Prepared New or Lightly Rusted Steel and Wrought Iron; Prime Non-Ferrous Metals Before Topcoating