WATTYL Killrust Epoxy Enamel Matt Black 4L Anti-Rust Metal Paint

WATTYL Killrust Epoxy Enamel Matt Black 4L Anti-Rust Metal Paint

Wattyl Killrust Epoxy Enamel Matt Black is an ultra-premium, anti-corrosive metal paint designed to provide durable rust protection with a smooth, non-reflective matt finish. Its advanced epoxy enamel formulation delivers excellent covering power, washability and scuff resistance for interior and exterior metal surfaces.

Killrust Epoxy Enamel can be applied directly to properly prepared new and lightly rusted steel or wrought iron without a separate primer. Non-ferrous metals, including galvanised iron, require a suitable primer before topcoating to achieve reliable adhesion and protection.

Ideal for metal fences, gates, railings, gutters, downpipes and structural steelwork, this 4L Matt Black enamel combines a contemporary decorative finish with practical corrosion protection. Apply by brush, roller or spray gun for metal maintenance, restoration and painting projects.

Key Features

• Anti-Corrosive Epoxy Formula: Provides durable protection against rust and corrosion on suitable metal surfaces.
• Matt Black Finish: Creates a smooth, low-reflection black finish for decorative and protective metal painting.
• Direct-to-Metal Application: Can be applied to properly prepared new and lightly rusted steel or wrought iron without a separate primer.
• Scuff Resistant and Washable: Tough enamel coating designed for durability and easy maintenance.
• Interior and Exterior Use: Suitable for metal fences, gates, railings, gutters and structural steelwork.

ADDITIONAL INFORMATION

• Brand: Wattyl
• Range: Killrust Epoxy Enamel
• MPN: 115208.004
• Barcode: 9300702141805
• Type: Single-Pack Anti-Corrosive Epoxy Enamel Topcoat
• Volume: 4L
• Colour: Black
• Finish: Matt (Gloss Level 0–10 at 60°)
• Suitable Surfaces: Properly Prepared Steel and Wrought Iron; Suitably Primed Non-Ferrous Metals Including Galvanised Iron
• Application: Interior and Exterior Metal Painting
• Coverage: Up to 14m²/L per Coat, Depending on Surface and Application
• Recommended Coats: 2
• Surface Dry: Approximately 4–6 Hours at 25°C and 50% Relative Humidity
• Recoat Time: Approximately 16 Hours
• Full Cure: Approximately 7 Days
• Minimum Wet Film Thickness: 75 Microns
• Minimum Dry Film Thickness: 38 Microns
• Application Methods: Brush, Roller or Spray Gun
• Clean-Up: Mineral Turpentine
• Priming Requirements: No Primer Required on Properly Prepared New or Lightly Rusted Steel and Wrought Iron; Prime Non-Ferrous Metals Before Topcoating