WATTYL Forestwood Exterior & Marine Varnish Gloss 1L
Couldn't load pickup availability
WATTYL Forestwood Exterior & Marine Varnish Gloss 1L
Wattyl Forestwood Exterior & Marine Varnish is an oil-based, high gloss finish specially formulated to protect exterior and marine timber surfaces. It provides protection against salt water spray, wind and the sun's ultraviolet rays while helping protect and rejuvenate the colour of exterior timber.
Formulated with a UV absorber to help resist darkening and discolouration, it is suitable for exterior timber doors, window frames, shutters, weatherboards, railings, masts, spars and other exterior timber. The clear finish imparts a distinct honey tone to timber.
Apply by brush or spray gun, with coverage of up to 10–12m²/L per coat depending on surface texture, porosity and application method. A minimum of four coats is recommended, with a surface dry time of approximately 6 hours and recoat time of 24 hours at 25°C and 50% relative humidity.
Key Features
- Exterior & Marine Protection: Formulated to protect exterior and marine timber surfaces from exposure to salt water spray, wind and sunlight.
- UV Resistant Additives: Contains a UV absorber to help resist timber darkening and discolouration caused by sunlight.
- High Gloss Finish: Provides a clear high gloss finish that imparts a distinct honey tone to timber.
- Water Protection: Film-forming varnish seals timber to provide protection against the elements.
- Versatile Application: Suitable for application by brush or spray gun on a range of exterior timber surfaces.
ADDITIONAL INFORMATION
- Brand: Wattyl
- Range: Forestwood
- Product Code: 813660.001
- Barcode: 9300702256899
- Type: Exterior & Marine Timber Varnish
- Size: 1L
- Finish: High Gloss
- Colour: Clear with a distinct honey tone
- Base: Oil-Based
- Suitable For: Exterior timber doors, window frames, shutters, weatherboards, railings, masts, spars and other exterior timber
- Application: Brush or spray gun
- Coverage: Up to 10–12m²/L per coat
- Surface Dry: Approximately 6 hours at 25°C and 50% relative humidity
- Recoat Time: Approximately 24 hours at 25°C and 50% relative humidity
- Full Cure: Approximately 3 weeks
- Recommended Coats: Minimum 4 coats
- Thinning: First coat may be thinned with 5–10% Mineral Turps on new bare timber
- Clean Up: Mineral Turps
- Not Suitable For: Interior use, walk-on surfaces or areas subject to long-term water immersion