U-POL Raptor High Temp Flameproof Primer Spray Paint Aerosol 295g Grey

An extreme temperature resistant primer that is designed to promote adhesion to difficult to prepare substrates and improve corrosion resistance for automotive use. Ideal for use on components such as exhaust headers, exhaust manifolds, tail pipes, mufflers and others surfaces exposed to extremely high temperatures. Its unique ceramic and proprietary resins provide tested heat resistance up to 1000°C  without delamination from the substrate.  RAPTOR Flame Proof Primer is designed to be applied to direct steel substrates.

Features

• 5x Tougher​
• Heat resistant up to 1000°C​
• Superior adhesion​
• Good chemical resistance to automotive fluids and common solvents once cured

Substrates

• Bare steel
• Aluminium
• Galvanised and zinc coated sheets
• Fully cured paint
• Polyester bodyfillers and G.R.P

Drying Times (at 20°C)

• Between Coats (Flash Off): 10 mins
• Dust Free: 30 mins

NOTE: Paint needs to fully cure to obtain desired properties, if on the vehicle, run at idle for at least 30 minutes. Let it cool down and run again under normal driving conditions for at least 30 mins. If off the vehicle, bake at 250°C for 1 hour.