TROTON Master Polyester Spray Filler 2K Automotive Body Filler 3kg
Couldn't load pickup availability
TROTON Master Polyester Spray Filler 2K Automotive Body Filler 3kg
Troton Master Polyester Spray Filler is a high-quality two-component spray-applied polyester filler developed for automotive body repairs. It provides excellent filling and levelling properties, helping create a smooth surface before priming and painting.
Designed for correcting sanding scratches, minor surface irregularities and imperfections left by conventional polyester body fillers, this spray filler offers good stability on vertical panels. Its isolating properties help separate subsequent primers and topcoats from underlying polyester putties.
Ideal for professional panel shops, automotive refinishing and vehicle restoration, Troton Master Polyester Spray Filler can be applied over properly prepared steel, aluminium, fibreglass, compatible primers and sound existing coatings. Follow the manufacturer's mixing, thinning and application instructions for best results.
Key Features
- High Filling Performance: Helps level surface irregularities and sanding scratches during automotive body repairs.
- Smooth Spray Finish: Creates an even surface ready for sanding and subsequent coating preparation.
- Excellent Vertical Stability: Suitable for filling and levelling larger upright body panels.
- Effective Isolation: Helps separate primers and topcoats from underlying polyester body fillers.
- Professional 2K System: Two-component polyester formulation designed for spray application.
ADDITIONAL INFORMATION
- Brand: Troton
- Range: Master
- Product Code: T8869
- Manufacturer Reference: M15767
- Barcode: 5900763006583
- Type: 2K Polyester Spray Filler
- Size: 3kg
- Colour: Light Grey
- Finish: Matt
- Suitable Surfaces: Prepared Steel, Aluminium, Fibreglass, Polyester Fillers and Compatible Primers
- Mixing Ratio by Volume: 100 Parts Filler to 6 Parts Hardener, Plus 35% Spray Filler Thinner
- Pot Life: Approximately 20 Minutes at 20°C
- Spray Setup: 1.8–3.0mm Nozzle; Typically 2.0–2.5 Bar
- Application: 1–3 Coats; Approximately 5–10 Minutes Between Coats
- Hardening Time: 2–3 Hours at 20°C or 25–30 Minutes at 60°C
- Final Sanding: P180–P320 Dry