POR-15 Rust Preventive Paint Semi-Gloss Black 3.78L Anti-Rust Coating

POR-15 Rust Preventive Paint Semi-Gloss Black 3.78L Anti-Rust Coating

POR-15 Rust Preventive Paint Semi-Gloss Black is a high-performance protective coating designed to stop rust from recurring on properly prepared metal surfaces. Its moisture-resistant formulation dries to a hard, non-porous finish that seals metal against exposure to water and corrosive contaminants.

Designed for direct application to prepared rusted, sandblasted and seasoned metal, POR-15 provides durable protection against chipping, cracking and peeling. The semi-gloss black finish is ideal for automotive chassis restoration, underbody components, metal fabrication and equipment maintenance.

For best results, clean and prepare surfaces using the POR-15 preparation system, then apply at least two thin coats. POR-15 Rust Preventive Coating is sensitive to UV exposure and must be topcoated when prolonged exposure to sunlight is expected.

Key Features

• Long-Lasting Rust Protection: Seals prepared metal against moisture to help prevent corrosion from recurring.
• Direct-to-Rust Application: Designed for properly prepared rusted, sandblasted and seasoned metal surfaces.
• Hard, Non-Porous Finish: Creates a tough protective coating resistant to chipping, cracking and peeling.
• Semi-Gloss Black Appearance: Suitable for automotive chassis, underbody and metal restoration projects.
• High-Build Protection: Designed for multiple thin coats to achieve a durable protective film.

ADDITIONAL INFORMATION

• Brand: POR-15
• Product Code: POR45401
• Barcode: 051491454018
• Type: Rust Preventive Protective Coating
• Volume: 3.78L (1 US Gallon)
• Colour / Finish: Black / Semi-Gloss
• Suitable Surfaces: Properly Prepared Rusted, Sandblasted and Seasoned Metal
• Theoretical Coverage: Approximately 23.2–41.8m² per 3.78L, Depending on Surface Conditions
• Application: Minimum Two Thin Coats; Thin Only with POR-15 Solvent, Up to 5% If Required
• Recoating: Typically 2–6 Hours When Dry to the Touch with Slight Finger Drag; Scuff Fully Cured Coating with 320-Grit Abrasive Before Overcoating
• UV Exposure: Apply a Suitable Topcoat Where Prolonged Sunlight Exposure Is Expected