POR-15 Rust Preventive Paint Grey 3.78L Anti-Rust Coating

POR-15 Rust Preventive Paint Grey 3.78L Anti-Rust Coating

POR-15 Rust Preventive Paint is a moisture-cured anti-rust coating designed to seal and protect rusted, sandblasted and seasoned metal surfaces. Its hard, non-porous finish creates a protective barrier against moisture, salt and corrosive contaminants, helping prevent further rust and corrosion.

Ideal for automotive chassis restoration, underbody components, metal fabrication, machinery and equipment maintenance, POR-15 can be applied directly to properly prepared rusty metal. The coating offers strong adhesion and resistance to chipping, cracking and peeling, making it suitable for metal restoration and corrosion protection.

Apply in thin coats using a brush, roller or suitable spray equipment. For best results, prepare surfaces with POR-15 Cleaner Degreaser and Metal Prep. Areas exposed to direct sunlight require a UV-resistant topcoat, while protected areas can remain untopcoated.

Key Features

• Anti-Rust Protection: Seals properly prepared metal to help prevent moisture and corrosive contaminants reaching the surface.
• Direct-to-Rust Application: Designed for properly prepared rusted, sandblasted and seasoned metal.
• Hard Protective Finish: Forms a tough, non-porous coating resistant to chipping, cracking and peeling.
• Moisture-Cured Formula: Cures through atmospheric moisture to form a protective coating.
• Versatile Metal Protection: Suitable for automotive chassis, underbody components, machinery and equipment restoration.

ADDITIONAL INFORMATION

• Brand: POR-15
• Range: Rust Preventive Coating
• Manufacturer Part Number: 45201
• Type: Moisture-Cured Rust Preventive Paint
• Size: 3.78L
• Colour: Grey
• Finish: Gloss
• Suitable Surfaces: Properly Prepared Rusted, Sandblasted and Seasoned Metal
• Application Methods: Brush, Roller or Suitable Spray Equipment
• Recommended Coats: Minimum 2 Thin Coats
• Theoretical Coverage: Approximately 23–42m² per 3.78L, Depending on Surface
• Recoat Time: Typically 2–6 Hours, When Dry to the Touch with Slight Finger Drag
• Thinning: POR-15 Solvent Only, Up to 5% if Required
• Surface Preparation: POR-15 Cleaner Degreaser and Metal Prep
• UV Protection: Requires a UV-Resistant Topcoat Where Exposed to Direct Sunlight
• Clean-Up: POR-15 Solvent Before Coating Cures
• Barcode: 051491452014