POR-15 High Temp Aluminium Heat Resistant Paint 236ml

POR-15 High Temp Aluminium Heat Resistant Paint 236ml

POR-15 High Temp Aluminium is a heat-resistant metal coating designed for exhaust manifolds, headers, exhaust pipes and other surfaces exposed to extreme temperatures. Its aluminium-coloured finish makes it ideal for automotive restoration, exhaust refinishing and high-temperature metal protection.

Engineered to withstand temperatures up to 649°C (1200°F), POR-15 High Temp resists cracking, chipping and peeling. Once correctly applied and heat cured, the coating also offers resistance to weather, salt and moisture, helping maintain its appearance in demanding environments.

This brush-on coating can also be thinned for spray application. Apply directly to thoroughly cleaned and prepared bare metal in thin coats, then heat cure according to the manufacturer's instructions. No primer or topcoat is required.

Key Features

• Extreme Heat Resistance: Withstands temperatures up to 649°C (1200°F).
• Exhaust Component Protection: Suitable for manifolds, headers and exhaust pipes.
• Durable Finish: Resists cracking, chipping and peeling under high-temperature conditions.
• Weather and Moisture Resistance: Helps protect correctly cured metal surfaces from salt and moisture.
• Direct-to-Metal Application: No primer or topcoat required on properly prepared bare metal.

ADDITIONAL INFORMATION

• Brand: POR-15
• Range: High Temp
• Product Code: POR44316 / 44316
• Barcode: 051491443166
• Type: High Temperature Heat Resistant Metal Paint
• Size: 236ml (8 US fl oz)
• Colour / Finish: Aluminium / Flat
• Maximum Temperature Resistance: 649°C (1200°F)
• Suitable For: Exhaust Manifolds, Headers, Exhaust Pipes and High-Temperature Metal Surfaces
• Application Method: Brush or Spray; Thin with POR-15 Reducer Solvent Up to 10% for Spraying
• Surface Preparation: Clean, Dry, Contaminant-Free Bare Metal; Sandblasting Recommended
• Coats: Two Thin Coats; Three for Surfaces Exposed to Corrosive Materials
• Recoat: Within 1–24 Hours; Abrade with 240–320 Grit After 24 Hours
• Heat Curing: Allow 24 Hours Before Heating Above 149°C (300°F), Then Heat for 15–30 Minutes and Allow to Cool
• Primer Compatibility: Apply Directly to Prepared Metal; Not Compatible with POR-15 Rust Preventive Coating or Other Primers