MATRIX EDGE MS-30 MS Super Speed Clear 946ml Automotive Urethane Clear Coat

**Hardener sold separately or available as a bundle**

Matrix Edge MS-30 MS Super Speed Clear is a fast-drying automotive clear coat designed for high-efficiency refinishing and rapid turnaround repairs. MS-30 Super Speed Urethane Clearcoat is a medium solids clear that offers three premium hardeners to provide consistent results over a wide range of conditions.

Compatible Hardeners: MH-005 (Normal), MH-006 (Slow) and MH-008 (Very Slow)

Features

• Super Speed Clear: Fast-drying formula designed to reduce cycle times and increase productivity.
• High Gloss Finish: Delivers a deep, professional gloss with excellent clarity.
• Smooth Application: Sprays evenly with good flow and levelling characteristics.
• Durable Protection: Provides strong resistance to environmental exposure and everyday wear.
• Automotive Refinish Use: Suitable for professional panel and paint repair applications.
• Mixing Ratio: 4:1 with MH Hardener

Application

• Intended Use: Automotive clear coating for refinishing and repair work.
• Application: Suitable for cars, commercial vehicles and refinishing panels.
• Usage Instructions: Apply over properly prepared and flashed basecoat using compatible hardener (MH-005, MH-006, MH-008)
• Coverage: Coverage varies depending on application method, film build and spray technique.
• Finish Quality: Designed to deliver a consistent, high-gloss professional finish.

Technical Information

Pot Life at 25°C (77°F)

• Sprayable 30-60 minutes

NOTE: Pot life will shorten as temperatures increase. Matrix Edge products are not recommended for use when panel temperature is below 15.5°C (60°F).

Flash / Dry Times

Air Dry at 25°C (77°F)

• Flash (after 1st coat) 5-10 minutes
• Flash (after 2nd coat) 5-10 minutes
• Out-of-Booth 15-30 minutes depending on temp
• Deliver/Polishing/Recoating 3+ hours

Force Drying at 60°C (140°F)

• Purge Time: 10 minutes
• Bake Time: 30 minutes
• Deliver/Polishing/Recoating: After 1 hour cool down

NOTE: Dry times may vary due to temperature, humidity, film thickness and airflow. If extreme colour sanding and buffing is needed allow overnight dry time.