OMEGA Concrete Sealer Clear Gloss 4L Driveway Paving & Masonry Coating

OMEGA Concrete Sealer Clear Gloss 4L Driveway Paving & Masonry Coating

Omega Concrete Sealer is a solvent-based protective coating designed to seal and enhance concrete, exposed aggregate, brickwork, stone and masonry. Its clear gloss finish provides an attractive protective surface that helps resist common fluid spills, oil and grease while enhancing the appearance of decorative concrete and paving.

Formulated for interior and exterior applications, Omega Concrete Sealer offers UV resistance and non-yellowing performance. It is suitable for driveways, garage floors, pathways, patios and decorative paving, providing a durable coating designed to withstand pedestrian and light vehicle traffic when correctly applied and cured.

Apply two coats using a quality brush or roller on clean, dry and properly prepared surfaces. Allow approximately 2 hours between coats at 25°C and 60% relative humidity. New concrete must cure for 4–6 weeks before sealing. Allow 24 hours before using driveways or garage floors and approximately 7 days for full cure. Avoid application during high humidity, pending rain or temperatures outside the manufacturer's recommended conditions.

Key Features

• Clear Gloss Finish: Enhances the appearance of concrete, exposed aggregate and decorative paving.
• Oil and Grease Resistance: Helps protect surfaces against common fluid spills.
• UV Resistant and Non-Yellowing: Designed to maintain the appearance of sealed surfaces in exterior conditions.
• Driveway and Paving Protection: Suitable for pedestrian and light vehicle traffic areas.
• Fast Drying: Touch dry in approximately 10–15 minutes with a 2-hour recoat time at 25°C.

ADDITIONAL INFORMATION

• Brand: Omega Protective Coatings
• Type: Solvent-Based Concrete Sealer
• Size: 4L
• Colour: Clear
• Finish: Gloss
• Suitable Surfaces: Concrete, Brickwork, Exposed Aggregate, Stone, Pebbles, Pattern Paving and Masonry
• Coverage: 6–10m²/L Theoretical, Depending on Surface Porosity
• Application: Brush or Roller, 2 Coats Recommended