NORGLASS NoRust All Surface Primer Grey 4L Fast Drying Anti-Corrosion Paint
Couldn't load pickup availability
NORGLASS NoRust All Surface Primer Grey 4L Fast Drying Anti-Corrosion Paint
Norglass NoRust All Surface Primer is a fast-drying, corrosion-inhibiting primer formulated for ferrous and non-ferrous metals and a wide range of other substrates. Its strong adhesion and inhibiting pigments help prepare surfaces for subsequent paint coatings while providing resistance to humidity and salt spray conditions.
Suitable for steel, cast iron, stainless steel, aluminium, bronze, timber, PVC, laminate, fibro and plasterboard, NoRust can also be used as a stain-sealing and blocking primer. It is suited to marine maintenance, metalwork, renovation and general surface preparation where a reliable primer is required. It is not intended for areas subject to continuous immersion.
Supplied in Grey in a 4L tin, this primer has a low-sheen finish and can be applied by brush, roller or spray. It is touch dry in approximately 20 minutes at 20°C and can generally be recoated after 2–3 hours. For best results, prepare the substrate thoroughly and follow Norglass instructions for application, thinning and subsequent coatings.
Key Features
- Corrosion-Inhibiting Protection: Formulated with inhibiting pigments to help protect ferrous and non-ferrous metals.
- Fast Drying: Touch dry in approximately 20 minutes at 20°C for efficient surface preparation.
- Multi-Surface Adhesion: Suitable for metal, timber, PVC, laminate and other specified substrates.
- Humidity and Salt Spray Resistance: Formulated for demanding environments, including marine maintenance above the waterline.
- Stain Blocking: Can be used as a stain-sealing primer before suitable finishing coats.
ADDITIONAL INFORMATION
- Brand: Norglass
- Range: NoRust All Surface Primer
- Product Code: 8232
- Size: 4L
- Colour / Finish: Grey / Low Sheen
- Suitable Surfaces: Steel, Cast Iron, Stainless Steel, Aluminium, Bronze, Timber, PVC, Laminate, Fibro and Plasterboard
- Coverage: 10m²/L at 40 Microns Dry Film Build
- Drying: Touch Dry 20 Minutes; Recoat 2–3 Hours at 20°C
- Application: Brush, Roller or Spray; Weatherfast Thinners as Specified by Norglass