MATRIX EDGE MS-30 MS Super Speed Clear 946ml + MH-005 Hardener Normal 236ml 

Matrix Edge MS-30 MS Super Speed Clear Kit combines a fast-drying automotive clear coat with the MH-005 Normal Hardener to deliver high productivity, excellent gloss and durable protection. Designed for professional refinishing, this clear coat system is ideal for rapid repairs and full panel work where speed and finish quality are critical.

Complete Super Speed Clear Normal Kit: Includes Matrix Edge MS-30 Super Speed Clear Coat and matched MH-005 Normal hardener.

Features

• Super Speed Clear System: Fast-drying clear coat designed to reduce cycle times and increase workshop efficiency.
• High Gloss Finish: Produces a deep, professional gloss with excellent clarity and levelling.
• Matched Hardener Included: Supplied with MH-005 Normal Hardener for balanced curing and reliable performance.
• Smooth Application: Sprays evenly with consistent flow for high-quality results.
• Professional Refinish Use: Suitable for panel shops, repair work and full refinishing applications.

Features

• Super Speed Clear: Fast-drying formula designed to reduce cycle times and increase productivity.
• High Gloss Finish: Delivers a deep, professional gloss with excellent clarity.
• Smooth Application: Sprays evenly with good flow and levelling characteristics.
• Durable Protection: Provides strong resistance to environmental exposure and everyday wear.
• Automotive Refinish Use: Suitable for professional panel and paint repair applications.
• Mixing Ratio: 4:1 with MH Hardener

Application

• Intended Use: Automotive clear coating for refinishing and repair work.
• Application: Suitable for cars, commercial vehicles and refinishing panels.
• Usage Instructions: Apply over properly prepared and flashed basecoat
• Coverage: Coverage varies depending on application method, film build and spray technique.
• Finish Quality: Designed to deliver a consistent, high-gloss professional finish.

Technical Information

Pot Life at 25°C (77°F)

• Sprayable 30-60 minutes

NOTE: Pot life will shorten as temperatures increase. Matrix Edge products are not recommended for use when panel temperature is below 15.5°C (60°F).

Flash / Dry Times

Air Dry at 25°C (77°F)

• Flash (after 1st coat) 5-10 minutes
• Flash (after 2nd coat) 5-10 minutes
• Out-of-Booth 15-30 minutes depending on temp
• Deliver/Polishing/Recoating 3+ hours

Force Drying at 60°C (140°F)

• Purge Time: 10 minutes
• Bake Time: 30 minutes
• Deliver/Polishing/Recoating: After 1 hour cool down

NOTE: Dry times may vary due to temperature, humidity, film thickness and airflow. If extreme colour sanding and buffing is needed allow overnight dry time.