MATRIX EDGE MS-130LV Matt Clearcoat 946ml + MH-130LV Matt Hardener 236ml

Matrix Edge MS-130LV Matt Clearcoat Kit combines premium low gloss clearcoat with the matched MH-130LV hardener to deliver a smooth, uniform matt finish for automotive refinishing. Designed for professional spray application, this 2K system provides durable protection while maintaining controlled sheen levels for custom and OEM-style matt finishes.

Complete Matt Clear Kit: Includes Matrix Edge MS-130LV Matt Clearcoat and matched MH-130LV Hardener.

Features

• Matt Finish Clearcoat: Produces a consistent, low-sheen matt appearance.
• 2K Urethane System: Two component clear designed for professional automotive use.
• Low VOC Formula: Complies with low VOC requirements while maintaining performance.
• Durable Protection: Offers resistance to weathering, UV exposure and everyday wear.
• Smooth Application: Designed for even flow and uniform sheen across panels.

Application

• Mixing Ratio: Mix 6:1 with MH-130LV Matte Clear Coat Hardener.
• Intended Use: Suitable for automotive basecoat refinishing where a matt finish is required.
• Application: Apply over fully flashed off and prepared basecoat surfaces.
  
• Usage Instructions: Apply 2 even wet coats allowing first coat to completely flash to a dull appearance.
• Coverage: Coverage varies depending on spray equipment, film build and application technique.
• Finish Quality: Designed to deliver a uniform matt finish without gloss variation when applied correctly.

Technical Information

Pot Life at 25°C (77°F)

• Sprayable 30-60 minutes

NOTE: Pot life will shorten as temperatures increase. Matrix Edge products are not recommended for use when panel temperature is below 15.5°C (60°F).

Flash / Dry Times

Air Dry at 25°C (77°F)

• Flash Time: Until surface is completely dull
• To Deliver: 16-24 hours

Note: Force Drying is not recommended for this clear coat.