Home » MATRIX EDGE MP-460 2:1 VOC Automotive Epoxy Primer Grey 946ml
Matrix Edge

MATRIX EDGE MP-460 2:1 VOC Automotive Epoxy Primer Grey 946ml

In stock
SKU: 760646
$71.99 AUD inc. GST
Similar products and bundles
This is a Sample Product Title
Was $200.00 Now $100.00

MATRIX EDGE MP-460 2:1 VOC Automotive Epoxy Primer Grey 946ml

**Activator sold separately or available as a bundle**

Matrix Edge MP-460 2:1 VOC Epoxy Primer Greys is a professional automotive epoxy that provides excellent adhesion and corrosion resistance to properly prepared metal, fiberglass and aluminum substrates as well as plastic body fillers.

2:1 VOC Epoxy Primer features an easy-to-use 1:1 mixing ratio and may be top coated with Matrix Edge 2K Primer Sealer, Matrix Edge Single Stage and Matrix Edge Basecoat/Clearcoat.

Compatible Hardener: MAV-465 Epoxy Primer Activator (1:1 Mixing Ratio)

Features

  • Mix Ratio: 1:1
  • 2:1 VOC Compliant: Low VOC formulation suitable for compliant automotive refinishing environments.
  • Excellent Adhesion: Bonds effectively to bare steel, aluminium and properly prepared OEM finishes.
  • Corrosion Resistance: Provides strong protection against rust and moisture penetration.
  • Grey Colour: Neutral grey shade ideal as a base for a wide range of topcoat colours.

Application

  • Intended Use: Designed for use over bare metal, sanded existing finishes and properly prepared repair areas.
  • Mixing Ratio: Mix Ratio: 1:1 with Matrix Edge MAV-465 Epoxy Primer Activator
  • Application Method: Apply 2-3 single coats (approx. 1.0-1.5 mils DFT per coat) and allow 10-20 minutes flash time between coats. 

NOTE: DO NOT apply MP-460 over Etch Primer.

Technical Information

Substrates

  • Steel
  • Fiberglass
  • Cured and sanded OE finishes
  • Aluminum
  • Polycarbonate
  • Galvanized Steel
  • Body Fillers
  • SMC
  • ABS 

Pot Life at 25°C (77°F)

  • 12 Hours

NOTE: Pot life will shorten as temperatures increase. Matrix Edge products are not recommended for use when panel temperature is below 15.5°C (60°F).

Flash / Dry Times

  • Flash: 10-20 minutes
  • Air Dry: 1-2 hours
  • Baking: 30 minutes @ metal temp. of 60°C (140°F)
  • Short Wave: 10 minutes
  • Sanding:12 hours

NOTE: Single layer applications can be top coated directly after flash of 15-30 minutes up to 6 hours, after which sanding is required. Two layer applications must be sanded prior to topcoating.

RECOAT

  • Top coat within 48 hours. If time exceeds 48 hours the primer must be sanded and cleaned prior to application of additional primer or top coat.