MATRIX EDGE Economy Basecoat Toyota 1D4 Silver Automotive Refinish Paint

*Available in 100ml, 250ml, 500ml, 1L, 2L, 3L and 4L*

MATRIX EDGE Economy Basecoat is a cost-effective 1K automotive refinish paint designed for reliable colour matching and smooth easy spray application. Custom mixed to your selected vehicle colour code, it is ideal for repairs, panel resprays and budget-conscious refinishing projects requiring consistent coverage and professional results.

Features

• Economy Refinish System: Designed as a budget-friendly solution for automotive repairs and resprays.
• Smooth Application: Formulated for even spray-out and consistent colour laydown.
• Good Coverage: Provides dependable hiding power over properly prepared and primed surfaces.
• Clear Coat Required: Must be finished with a compatible Matrix Edge clear coat for gloss, durability and protection.

Application

• Mixing Ratio: Mix 1:1 with compatible MR-Series Matrix Edge Reducers:

MR-0960 (Cool), MR-0970 (Medium), MR-0985 (Hot), or MR-0995 (Very Hot)

Or Mix: 1 Part Premium Basecoat with 1 Part compatible MR-Series Reducers and 1% MH-061 Basecoat Activator by volume (1:1:1%)*

• Intended Use: Suitable for automotive panels, vehicles, touch-ups and refinishing work.
• Application Method: Apply 2 to 3 medium wet coats with a 75% overlap or until
  hiding is achieved
• Coverage: Coverage varies depending on colour, substrate, spray technique and film build.
• Finish Quality: Designed to deliver consistent colour accuracy when applied and clear coated correctly.

Technical Data

POT LIFE at 25°C (77°F)
- Sprayable up to 2 hours with MH-061
- 7 days when mixed without MH-061
Note: Pot life will shorten as temperatures increase. Matrix Edge products are not recommended for use when panel temperature is below 25°C.

 SURFACE PREPARATION
- Surfaces should be prepared using the proper undercoat system following
recommended procedures.
- All surfaces should be final sanded with P400-P600 grit or equivalent.

SPRAY GUN SET UP
- Compliant: 1.3mm - 1.4mm
- HVLP Fluid Tip: 1.3mm - 1.4mm

FLASH / DRY TIMES
AIR DRY at 25°C (77°F)
- Flash between coats: 5-10 minutes
- Tape time: 30 minutes
- To clearcoat: 20 minutes

Note: Extended flash times are recommended above 3 coat application
Note: Premium Basecoat must be scuffed after 24 hours and reapplied before clearcoating