Please Note: This product is only available to be shipped Australia-Wide

***This product requires a hardener to activate, please make sure either 1. You order this as well 2. You already have the required hardener as it will not work without it***

862 Series is a 2K (two-component) Polyurethane designed for exceptional gloss, hardness, and chemical resistance. This single-stage topcoat provides excellent productivity for spot, panel, and overall repairs.

Technical Information

Mixing Ratio: 4:1 with HPC series activator + 0-10% 170HP series Thinners

Surface Preparation: All surfaces should be finished with P320 - P500 wet and dry sandpaper (or equivalent) and primed where necessary.

Application: 

• Apply 1 medium wet coat followed by a full second coat
• Allow 15-30 minutes flash off between coats

For more details on this product, please see the Technical Data Sheet below:

https://datasheets.valsparautosupport.com/tds/Valspar%20Refinish_CPS_LIC/au/862.pdf