Soudal Grip and Fix Adhesive Trade Quality High Strength 300ml 3 Pack Sign Panel
Grip & Fix is a solvent-free construction adhesive
with high bond strength and an extremely high
initial grab (over 140 kg/m²).
- Gap-filling properties when bonding on uneven
- Extremely high initial grab; 140kg/m² (full
- Direct application onto one substrate
- Moisture resistant
- Can be painted over
- Replaces screws and nails
Extremely suitable for the bonding of heavy
materials such as wood, synthetic building
materials, panels, metal, stones etc. to several
substrates such as wood, stones, plaster,
Packaging: cartridge 310mL
Type: All substrates except PE, PP and bituminous
surfaces. At least one of the substrates should be
porous otherwise the curing rate will be significantly
State of Surface: The substrates should be dry,
clean and free of dust, grease and loose particles
Applying the adhesive:
Method: Apply the adhesive by means of a caulking
gun onto one surface in beads or dabs (every 15
cm. for panels). Always apply adhesive to the
edges and corners of panels. Press the surfaces
together immediately and tamp down with a rubber
hammer. Support may be required. The bond can
be loaded after 24-48 hours.
Application temperature: +5°C to +35°C
Clean: with water if not cured, mechanically if cured
Repair: with same material
12 months in unopened packaging in a cool and dry
storage place at temperatures between +5°C and
+25°. Do not expose to frost.
Initial grab; at least 140kg/m²
End strength wood-wood; 22kg/cm²
End strength wood-aluminium; 16kg/cm²
End strength wood-PVC; 12kg/cm²
Health & safety recommendations:
Apply the usual industrial hygiene.
Consult the label for more information.
• When bonding, the pressure applied
determines the initial grab and the final bonding
strength. The duration during which pressure is
applied is less important.
• Do not use in applications where continuous
immersion is possible.