The Brumby SSX Polishing Compound is ideal for polishing applications on copper, brass and stainless steel where a high gloss finish is desired. For the best results, use the compound with a Josco Loose Leaf Calico Buff.
Josco also has three other types of polishing compounds available in its range, in both standard and large sizes. They are all intended for use on surfaces without major blemishes, resulting in little metal removal and will achieve a bright result. Any small scratches that are produced by cutters can subsequently be removed with the use of a finishing compound.
Directions for use:
Most buffs have a tapered centre bore, and may be mounted on the left or right of your grinder using a tapered spindle.
Select the correct buffs and compounds for your job. Initial cutting can be done with a fastcut compound and either a stitched sisal or a stitched rag buff followed by a polishing compound and a loose leaf buff. For best results, never use different compounds on the one buff – keep a separate buff for each compound.
Apply the compound across the face of the rotating buff for a few seconds, taking care not to apply too much compound which will overload the buff. It is far better to apply a little compound more frequently than to over dress the buff.
After applying the compound to the buff, bring the work piece into contact with the buff and with light pressure, move back and forth across the job.
After polishing, remove any compound residue left on the work piece with mineral turpentine or methylated spirits, or warm soapy water.